According to the different processing products, filling machine equipment can be divided into three types: liquid, semi fluid and paste. But what’s specific differences among them? In below chapter, we chantecpack will introduce you with representative different kinds of liquid product:
1、 The difference of filling equipment can be seen from the applicable processing products;
Liquid products: usually refer to liquid raw materials with good fluidity, such as purified water, carbonated drinks, fruit juice, soy sauce, vinegar and alcohol, etc. (liquid filling)
Semi fluid products: the fluidity is inferior to that of liquid products, usually referring to edible oil, lubricating oil, syrup, loquat dew, honey, etc. (You can get reference from our multi-lane ketchup packing machine)
Paste product: it is the one with the worst fluidity among the three, generally in the form of solid-liquid coexistence. There are various sauces, seasonings and hot pot condiment. (You can get reference from out Hardener, Resin, Expory, Putty packing machine)
The above explains the difference of processing products among the three kinds of equipment, which indirectly reflects the different processing methods.
2、 The processing methods are different as follows:;
Liquid filling machine: normal pressure (equal pressure) filling is generally adopted,
Semi fluid filling machine: vacuum (negative pressure) filling is generally used,
Paste filling machine: generally using plug filling (pressurized) filling.
There is no difference in the nature of filling machine equipment. General materials can be filled with each other. However, in terms of accuracy, the output will be greatly different from the adaptive products. The user can ask the equipment manufacturer to give the scheme, and the corresponding functional use can be realized by adding and assembling the corresponding accessories between the filling machines.
Post time: Mar-16-2020