MAINTENANCE ADVICE OF VERTICAL SPICE/MILK/COFFEE POWDER VFFS PACKAGING MACHINE

No matter in use or in idle process, the equipment will produce wear. Wear refers to the wear of equipment in physical form. During the operation and use of the equipment, the surfaces of parts and components that move mutually, under the action of force, produce various complex changes due to friction, resulting in surface wear, peeling and shape change, as well as fatigue, corrosion and aging of parts and components due to physical and chemical reasons, etc. The physical wear in the process of using the equipment includes normal wear and tear, as well as abnormal wear caused by improper storage and use and corrosion caused by natural force (caused by bad working environment). The result of this wear is usually as follows:

(1) Change the original size of the components of the equipment. When wear to a certain extent, it will even change the geometry of parts.

(2) It can change the mutual matching property between parts and components, resulting in loose transmission, poor accuracy and working performance.

(3) The damage of parts, even the damage of other parts associated with them due to the damage of individual parts, leads to the damage of the whole component and serious accidents.

spice powder packing machine

In the idle process of the equipment, the function of natural force (such as the erosion of corrosive medium in the oil seal, the erosion of moisture and harmful gas in the air, etc.) is the main reason for the abrasion. If the equipment is not well kept and lacks necessary maintenance measures, it will cause the equipment to be corroded. With the extension of time, the corrosion surface and depth will continue to expand and deepen, resulting in accuracy and work The working capacity is lost naturally, and even discarded due to serious corrosion.

Powder packaging machine like spice/milk/coffee powder packing machine especially need pay attention to daily maintenance and maintenance, because this can not only prolong the service life of equipment, but also the equipment itself will not cause failure and so on.So for the maintenance and maintenance of powder packaging machine, we would like to give you a few suggestions:

 

1. Oil lubrication:

The gear meshing points, oil injection holes of bearing with seat and moving parts should be regularly lubricated with oil. Once per shift, the reducer is strictly prohibited from running without oil. When filling the lubricant, pay attention not to put the oil tank on the rotating belt, in order to avoid slipping, throwing or premature aging of the belt and damage.

Another point to be noted is that the reducer must not run when there is no oil, and 300 hours after the first operation, clean the interior and replace with new oil, and then change oil every 2500 hours of work. When lubricating oil, do not put oil droplets on the drive belt, because this will cause slippage and loss of powder packaging machine or premature aging damage of the belt.

 

2. Clean regularly:

After shutdown, the metering part should be cleaned in time, and the heat-sealing body should be cleaned regularly, especially the packaged materials with high sugar content in some granules. It is better to clean the turntable and the discharging gate. The heat-sealing body also needs to be cleaned regularly to ensure that the sealing lines of the packaged products are clear. For the scattered materials, it should be cleaned in time, so as to facilitate the cleaning of the machine parts and thus prolong the packing better. Service life, but also often clean the dust in the electronic control box, in order to prevent short circuit or poor contact and other electrical failures.

 

3.Maintenance of machines:

Maintenance of powder packaging machine is one of the keys to prolong the service life of the packaging machine. Therefore, it is necessary to check the screw in all parts of the powder packaging machine regularly without loosening. Otherwise, it will affect the normal rotation of the whole machine. Waterproof, moisture-proof, anti-corrosion and rat-proof should be paid attention to in the electrical parts of the machine to ensure the cleanliness of the electric control box and the wiring terminals in order to prevent electrical failure. After the shutdown of the machine, the screw should be made loose. The two heat sealers are in an open position to prevent scalding of packaging materials.

 

The above suggestions on the maintenance methods of powder packaging machine hope to bring help to you. Powder packaging machine is a very important position in the production and operation of enterprises. Once the machine fails, it will delay the production period. Therefore, the maintenance and maintenance of the machine is very important, hoping to attract the attention of enterprises.


Post time: Jan-09-2020
WhatsApp Online Chat !